tsm/tssm/ecm password learn procedure

[wrecker]

TSM/TSSM ECM Password Learn Procedure
Step Action Confirmation Notes
1 Set Run switch to Run
2 Turn Ignition key On-Off-On-
Off-On-Off-On and then toggle
the Left Turn Signal switch
twice.
3 Turn Ignition key Off-On Verify the Check Engine lamp
and Security Lamp illuminate
briefly and then turn off.
Security lamp will not
illuminate on non-security
(TSM) Twin Cam models.
4 Attempt normal start one time. Engine starts and stalls
immediately. check engine
lamp stays on.
Password has not been
learned and sets trouble code
P1009, thus stopping fuel
flow.
5 Wait 10 seconds Security Lamp remains lit for
V-Rod and TC88 with TSSM.
Lamp will not be on for TC88
TSM models.
ECM enters Password
Learning mode for 10
minutes. Do Not cycle the
ignition or disrupt power.
6 Wait until Security Lamp turns
off or a minimum of 10 minutes
has passed.
7 Quickly (within 2 seconds) turn
Ignition key OFF-ON
Security Lamp remains lit for
V-Rod and TC88 with TSSM.
Lamp will not be on for TC88
TSM models.
8 Wait until Security Lamp turns
off or a minimum of 10 minutes
has passed.
Password Learning mode for
10 minutes. Do Not cycle the
ignition or disrupt power.
9 Quickly (within 2 seconds) turn
Ignition key OFF-ON
Security Lamp remains lit for
V-Rod and TC88 with TSSM.
Lamp will not be on for TC88
TSM models.
10 Wait until Security Lamp turns
off or a minimum of 10 minutes
has passed.
Password Learning mode for
10 minutes. Do Not cycle the
ignition or disrupt power.
11 Quickly (within 2 seconds) turn
Ignition key OFF-ON
Security Lamp light and then
turn off. Lamp will not be on
for TC88 TSM models.
12 Turn Ignition switch OFF. Wait
15 seconds. Turn Ignition
switch ON and start engine to
confirm the Password Learn
Procedure is successful.
Engine will start and remain
running. If engine immediately
stalls and fails to restart the
Password Learning mode
was not successful. Start over
at step 1.
The above steps must be timed and performed exactly as described. Any deviation will
require you to start again from step 1.

[CoolMaker]

Boy, I am really glad you posted that one, I have been looking for it... Thanks again.